For your 2005 Chrysler Town and Country with Stow and Go seats I recommend going with Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75305. With a 2" receiver tube opening there are a lot more option for accessories.
Keep in mind that the hitch does not determine the towing capacity of your vehicle. Always go with the lowest number between the hitch and the vehicle.
To help get you on the road pulling a trailer safely I recommend T-One Vehicle Wiring... view full answer...
The Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs # K2MMT5X7 is not designed to carry kayaks, but I don't see any reason why you couldn't attach the kayak carriers to the two end bars. The kayak when strapped in will further restrict movement, so that wouldn't be an issue. The tongue length from coupler to front gate is 44-7/8 inches. The tailgates have a weight capacity of 250 lbs for the front gate and 100 lbs for the rear gate, so your kayak and carrier... view full answer...
The Air Lift AirLift 1000 Air Helper Springs part # AL60814 is the same kit that is used on a 2008, 2009, and 2010 Chrysler Town and Country. Therefore, the installation process between vehicles will be nearly identical. In regards to the installation of this kit on your 2008 Chrysler Town and Country, the upper spring seat hole will need to be enlarged to a 1/2" diameter in order for the airline to reach the cylinder.
To install the springs on your Town and Country, you will need a 1/2"... view full answer...
You will need to know what class hitch you currently have on your Town and Country. This should be indicated on the safety warning label on the hitch.
If you have a class l hitch installed, there will be a stop or indent inside the receiver wall that prevents Class ll carriers or ball mounts from being used. If you find that you have a class l receiver, it is rated for a tongue weight capacity of 200 lbs, and you would need a class l rack or carrier. All Class l bike carriers are limited... view full answer...
I recommend going with an adjustable ball mount, the MaxxTow # MT70068, which will give you up to 6-1/4" of rise on your 2015 Chrysler Town and Country. With this you'd need pin and clip # PC3 as well as 2" hitch ball # 40038. For a wiring harness to add a 4-flat you would want the # C56331. If you only wanted to hook up your 4-way to your trailer's 7-way you would then need adapter # 30717.
If you planned on using your trailer's electric brakes you would not need that adapter, instead... view full answer...
The A-iPower 5,000-Watt Portable Generator, Item # 289-AP5000, is designed to power appliances and tools like air compressors, air conditioners, electric heaters, etc. To choose the right generator, you must match the size of the generator (starting output and running output in watts) with the electrical demands of the appliances or equipment you will be operating. The A-iPower Generator has a starting (surge) power output of 5,000 watts and a running (rated) power output of 4,000 watts... view full answer...
The Blue Ox Base Plate Kit # BX1969 you referenced is a compatible fit for your 2006 Chrysler Town And Country. That being said based on the owners manual this vehicle is not recommend for towing behind a motorhome by the manufacturer. view full answer...
I checked with Thule and the Passage 2 Trunk Mount Bike Rack, # TH910XT, will fit your 2010 Chrysler Town and Country. I have included a link to the installation details and a link to a video review of the bike rack for you.
The bar you need for a womens bike is called the Bike Adapter Bar, # TH982XT. It will attach to the bike just below the handle bars and seat and allow the carrier to hold the bike more level. I have included a link to a video review of the adapter so you can see how... view full answer...
I reviewed the written installation instructions for the Draw-Tite 2-inch Class III hitch # 75579, which is a confirmed fit on your 2008 Chrysler Town and Country, and I found no reference to issues installing this hitch on vans with electrically-operated third row seating. But to make absolutely certain that this hitch will work for you I called my technical contact at Draw-Tite.
Draw-Tite confirmed that this 2-inch hitch # 75579 will fit just fine on your van. I linked for you a video... view full answer...
Yes, the Curt Trailer Hitch Receiver # 13364 will still fit a 2010 Chrysler Town and Country even if it has the Stow&Go seats.
We actually had the chance to install this hitch on the exact same style that you're talking about and I've attached an installation video for you to check out.
A lot of people get a hitch installed on a Town and Country to haul smaller trailers. If this is you then you'll also need the wiring kit # 118552 and a ball mount kit like part # 989891 which includes... view full answer...
The Draw-Tite Trailer Hitch, # 75579, will fit the 2008 Chrysler Town and Country with the Stow-N-Go seating. It is a Class III hitch with a Tongue Weight of 400 lbs. and a Gross Towing Weight of 4,000 lbs.
If you will be towing, you will need the Draw-Tite Ball Mount, # 2753, and the Pin and Clip, # PC3. You will also need a hitch ball. Depending on the coupler size on the trailer you will be towing you will need either a Tow Ready 1-7/8 inch Hitch Ball, # 19260, or a Tow Ready 2 inch... view full answer...
I recommend the RightLine Gear Sport 3 XL, part # RL100S30, for your Town and Country. The RightLine Sport roof bags are designed to fit on naked roofs, roofs with raised side rails, or aftermarket and factory roof racks like yours.
I also like RightLine products becuase of how waterproof their stuff is. view full answer...
While we cannot confirm for sure that the Yakima HitchSki # Y02418 will fit your non-Yakima Allen sports bike rack, we can give you a good idea of whether it will fit. The main thing you need to consider on your rack is whether the arms are close enough together to accommodate the smallest (uppermost) part of the HitchSki and if your rack will be able to clear the top clamps. The top measurement is 17-1/8 inches and the inward points of the top cradles are 14-3/4 inches. Please see attached... view full answer...
Yes, the Thule Passage 3 Bike Carrier # TH911XT, will fit your 2010 Town and Country. This is Thule's entry-level trunk mount bike rack made with a steel frame, anti-sway cradles for the bikes and adjustable arms for ideal bike support. I've attached a review video of this bike rack for you to check out.
If you prefer the Thule brand, then I suggesting looking at the OutWay PRO 3-Bike Rack, # TH56BV. It comes with all the integrated locking features to keep your bikes and the rack itself... view full answer...
The Class II Hitch that will fit your vehicle is the Draw-Tite Trailer Hitch for the 2000 Chrysler Town and Country, part # 36296. This is the Class II Hitch from Draw-Tite for your vehicle. There is a Class III hitch available for your 2000 Chrysler Town and Country, also.
I would recommend going with the Class III hitch from Draw-Tite for the 2000 Chrysler Town and Country, part # 75119, because it has a greater weight capacity and there are less limitations on what accessories you can... view full answer...
I spoke with my contact at Reese and he verified that you can use friction sway control bracket # RP26003 on a ball mount in the rise or drop position. view full answer...
We have tested the Sportrack Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers - 1-1/4" and 2" Hitches # SR0901 and confirmed the fit with the Curt bike racks like the part # C18087 that you mentioned so this would be the way to go. view full answer...
I recommend going with the Draw-Tite # 75579 to carry the Hollywood Racks Sport Rider # HR1400Z with your 2015 Chrysler Town and Country. This may require the plastic mud flap on the driver's side to be trimmed but when we installed this on a 2015 Town and Country there wasn't any trimming that we had to do (see attached video).
The Sport Rider is an excellent choice and will do a great job at carrying 4 bikes. My only concern is that if you check out the review video, due to the length... view full answer...
In order to determine if the SportRack Vista XL Cargo Box, # SR7018, will fit the factory crossbars on your 2010 Chrysler Town and Country, you will need to measure the width of the crossbars and the distance between the bars.
If the crossbars measure under 4 inches wide, the mounting hardware will fit. And, as long as the center to center distance between the two bars is 25-7/8", 27-7/8", or 29-7/8", the box will fit your factory rack. view full answer...
Go To Results